DV MARK EVO 1 DVH130031Z

DV MARK EVO 1 DVH130031Z

The DV MARK EVO 1 features two channels with a classic standard amp controls interface, reverb control for each, MIDI IN, on board tuner, aux in and headphones out, FX loops, XLR Line Out, Boost, and a powerful 250W MPT (Mark Proprietary Technology) power amp with an impressive warm tone and incredible dynamic.

INPUTS

INPUT 1 (passive): impedance 1MΩ 
INPUT 2 (active): impedance 1MΩ
AUX IN: stereo mini-jack 3.5mm
RETURN 1 / RETURN 2: mono jack 1/4"
USB: type B
MIDI: DIN 5 poles

OUTPUTS

SPEAKER OUTPUT (4ohms minimum load)
two mono jack 1/4" + one Speakon (in parallel)
PHONES : stereo mini-jack 3.5mm
SEND 1 / SEND 2: mono jack 1/4"
XLR LINE OUT
CAB/Speaker Emulator is assignable to this output using the DV Mark EVO 1 software.

CHANNELS
TWO (with six Virtual AMPs per channel)

EQUALIZATION (per channel)
LOW-MID-HIGH

CONTROLS 
GAIN (per channel)
AMPS Selection: 6 for CH1 / 6 for CH2 
LEVEL (per channel)
REV 1 
REV 2
MASTER
PHONE LEVEL
BOOST

MIDI FUNCTIONS
Switch CH1, CH2 
FX1 ON/OFF, FX2 ON/OFF 
BOOSTER ON/OFF
MUTE/TUNER
Controllable by the optional EVO1 Controller / MIDI Pedalboard

OTHER FEATURES
Channels Switch
+4dB / -10dB and GND Lift switches (LINE OUT)
TUNER (with MUTE function) 
440Hz / half step down / whole step down modes

DIMENSIONS
14.18”/ 36 cm (w); 3.94”/ 10 cm (h); 10”/ 25.4 cm(d)

WEIGHT
7.05 lbs / 3.2 Kg

OUTPUT POWER (MPT Power Amp)
250W RMS @ 4 ohms, 150W RMS @ 8 ohms

POWER REQUIREMENT
100/120V; 230V; 240V
50/60Hz
(Voltage is factory preset according to region of sale)

DV Mark amps/combos are manufactured to be sold and used in the country of purchase, and are factory preset to that country’s voltage.